Hey, guys, this is Annke SP4 with remote accessand a detection sensor.
Now, let’s begin the setup.
Firstly, plug in the power adapter to get the IPC charged and then long press the “SET” button toreset the camera before use.
Please wait a few seconds when it’s resetting.
Once it is done, insert the TF card into the slot, so that the security video can be recorded and saved in the card.
Then install the “U_L” viewing App byscanning the QR-code or through Appstore.
After it is well installed on your phone,click on the icon to enter the APP register an account and log in.
Click “Add camera” at the bottom and follow the step by step guide to setup the camera.
Press “Next Step” and there appears the network configuration menu.
Click on the Wi-Fiicon, choose the available network and enter the password to get them connected.
After successfully connected, click to view video and the temperature display icon appearstoo.
Slide “Up, down, left and right” on the screen and adjust the IP camera to the best shooting angle.
Click on “Camerashoot” to shoot the current image You can click on “Talkback” to get two-way audio communication Click on “Music” to play music through IPC (You can remote play the built-in lullabiesto appease your baby or you can record one by yourself if you like), press again to stop playing music.
If you wanna get full screen view, rotateyour phone to 90 degree.
Click on the setup icon on the top right ofthe screen and enters the setup menu, you can freely modify the settings according to your needs.
Hope it keeps a good company in your home security.
Review Of Annke SP4 Wireless IP Security Camera